Lubrication Systems for Metal Forming

 

               

Eliminate the costly mess and waste of lubricating coil, blank and sheet stock

• cut lubricant waste by 50 to 80 percent
• reduce clean-up costs (labor and cleaning supplies)
• slash coolant treatment and disposal costs
• lower costs associated with shortened die life caused by improper lubrication.

 

Programmable Controller Controls Fluid to Spray Nozzles and Rollers

• Controls how much fluid flows to one or more of these UNIST systems:  
  UNI-Roller™ Type S, Mini-Roller, Powered UNI-Roller and/or spray nozzle systems.
• Controller actuates a bank of fluid solenoid valves (from 6 to 22 outputs) that dispense a programmed quantity of fluid to specific lube points. The valve actuation is determined by production line rates so there is wasted lubrication whether it is a stamping press or roll forming operation.
• The control guides user through set up.

User Stories:

• Save 2020 Gallons of Lube   (70k Acrobat pdf)
• Reduce the MESS  (72k Acrobat pdf)                                                             Use your browser BACK
  Earn Pizza Money  (63k Acrobat pdf)                                                                   button to return here.
• Programmable Lubrication Beats the Heat  (72k Acrobat pdf)
  In depth article, reprint from Metalforming Magazine
   

 For help with metal forming lubrication applications Call..... 
                .....Thank you.