The ShopFloorConnect Machine Interface (SMI 2) is the fastest way to connect virtually any machine to the ShopFloorConnect Machine Monitoring Software.

Features:

Quickly connects any machine to ShopFloorConnect

User-friendly 6.5" color touch screen interface Available in 2 versions: enclosure or panel-mount

Significantly lower cost than comparable devices

Ethernet Ready, simply plug it in to your existing network 32 downtime codes that are fully customizable – both the reasons themselves, and the menu order in which they appear “Forced Dialog” mode can inhibit machine restart until a downtime reason has been sent to ShopFloorConnect 7-Digit parts counter with preset

Ability to enter Operator number, Job number, and an identifier for each job.

Specifications:

INPUT POWER: 90-264VAC 50-60 Hz, 1A 24 VDC version is also available as an option

INPUTS:

*Input for cycle/parts count

*Input for machine running/stopped signal

*Input for scrap count (optional)

*Input for setup mode (optional) This mode allows the machine to be cycled during setup and troubleshooting while maintaining the current downtime reason and without incrementing the parts count

*Four inputs to automatically set the downtime to predefined reasons (optional) Two on-board USB inputs for bar code or other scanners.

* These inputs can be configured - as a group - to either PNP (24V "on") or NPN (0V "On"). The factory default is PNP. OUTPUTS Stop circuit – Dry Contact - 30VDC, 240VAC, 4 Amp max. Used to inhibit machine restart until a downtime code is selected, and optionally to stop the machine when the part counter preset is reached